Microsoft Edge Using Too Much Memory or CPU? 8 Ways to Fix It in Windows 11

Aseem Kishore
15 min read

Help Desk Geek is reader-supported. We may earn a commission when you buy through links on our site. Learn more.

Microsoft Edge is using too much memory or CPU. Your laptop fan won’t stop, Windows feels sluggish, and Task Manager shows a long list of “Microsoft Edge” entries eating RAM. In most cases a single tab, extension, or setting is responsible, and Edge’s own tools can show you which one before you change anything.

Before You Change Anything

Many Edge and WebView2 processes are normal

Edge runs separate processes for the main browser, the graphics engine, each tab, and each extension. Microsoft designed it this way so one crashed tab doesn’t take down the whole browser. Seeing many Edge entries in Windows Task Manager is expected and is not a problem by itself.

You may also see Microsoft Edge WebView2 Runtime entries. These aren’t your browser tabs. WebView2 is a shared component that other Windows apps use to display web content, so it can run even when Edge is closed. If WebView2 is the thing eating your CPU, see our guide, Microsoft Edge WebView2 Runtime: What It Is and Why It’s Running. The fixes below are for Edge the browser.

If your whole PC is low on memory and Edge is only one of several heavy apps, our article 7 Ways to Free Up RAM and Fix High Memory Usage in Windows 11 covers the system-wide side.

8 Ways to Fix Edge High Memory or CPU Usage

These fixes are based on procedures described in Microsoft’s official Fix high CPU or memory usage in Microsoft Edge guide.

The order here reflects a practical troubleshooting flow, not an exact sequence mandated by Microsoft. They start with diagnosis and end with a full settings reset.

Fix #1: Find the culprit with Edge’s Browser Task Manager

Symptoms:

  • Edge suddenly gets slow or the fan spins up on one specific site
  • Windows Task Manager shows high usage but doesn’t tell you which tab is to blame

Why it happens: A heavy website running video, animations, or complex scripts can keep a CPU core busy or hold onto a lot of memory. Windows Task Manager groups everything under “Microsoft Edge,” so you can’t see which tab is at fault. Edge’s Browser Task Manager breaks usage down by tab, extension, and utility process.

Steps:

  • Open Microsoft Edge.
  • Press Shift + Esc. You can also click the Settings and more (…) menu and choose More tools > Browser task manager.
  • Click the CPU column header to sort by processor use. Click it again to flip the order if needed.
  • Click the Memory footprint column header to sort by memory use.
  • Look at the top entries. Tab entries show the page title, and extension entries show the extension name.
  • Select the tab or extension using the most resources and click End process.
  • Reload the tab if you still need it.
Edge Browser Task Manager window opened with Shift+Esc, listing Browser, GPU Process, tabs, and extensions, with the Memory footprint and CPU column headers highlighted and the End process button highlighted

Verify: Watch the CPU column for a minute. If usage drops after ending the process and climbs again when you reload the same site, the site itself is the problem. If an extension keeps topping the list, go to Fix #2.

Fix #2: Turn off extensions, then re-enable them one at a time

Symptoms:

  • High CPU or memory even with only one or two tabs open
  • An Extension: entry sits near the top of Browser Task Manager

Why it happens: Extensions run background scripts. A poorly built or buggy extension can use resources constantly, even on pages where you never use it.

Steps:

  • Type edge://extensions/ in the address bar and press Enter.
  • Turn off the toggle next to every installed extension.
Edge Extensions page listing installed extensions, with one extension's on/off toggle highlighted and the Remove link highlighted
  • Use Edge normally for several minutes and watch Browser Task Manager (Shift + Esc).
  • Turn on one extension.
  • Use Edge for a few more minutes and check CPU and memory again.
  • Repeat steps 4 and 5 until usage jumps. The last extension you turned on is the likely culprit.
  • Click Remove under that extension, or leave it off and check for an updated version.

Verify: With the problem extension off, CPU and memory should stay steady during normal browsing.

Fix #3: Turn on sleeping tabs and Efficiency mode

Symptoms:

  • You keep dozens of tabs open all day for reference
  • Memory use climbs steadily the longer Edge stays open
  • Your laptop runs hot or the battery drains faster while Edge is open

Why it happens: Tabs you haven’t looked at in hours still hold memory and can keep running scripts. Edge’s performance settings page bundles several controls that target this, including sleeping tabs, Efficiency mode, the Performance detector, and manual resource controls.

Steps:

  • Type edge://settings/system/managePerformance in the address bar and press Enter.
  • Turn on Save resources with sleeping tabs.
Edge Settings performance page with the Save resources with sleeping tabs toggle highlighted and the inactivity timeout dropdown highlighted below it
  • Use the timeout dropdown under that toggle to choose how long a tab must be inactive before it sleeps. A shorter time saves more resources.
  • Add sites that must stay active, like a web chat or music player, to the exception list on the same page.
  • On the same settings page, turn on Efficiency mode if your version of Edge offers it (newer versions may call it Energy saver; it’s separate from Windows Task Manager’s efficiency mode). Microsoft describes it as reducing power and resource use by adjusting background and some foreground activity, and it can turn on automatically when your laptop’s battery runs low.
  • Watch the tab strip for Edge’s Performance detector label, which flags a tab using unusually high resources. Click the flagged tab, then use Browser Task Manager (Fix #1) to confirm what’s happening inside it.
  • If the performance settings page on your version shows resource controls, use them to review memory and CPU use per tab and close heavy tabs directly from that page.

This page has been redesigned several times, and the exact names and availability of sleeping tabs, Efficiency mode, the Performance detector, and resource controls vary between Edge versions, so go by what’s on your screen.

Verify: Leave a few tabs untouched past your timeout. They should look faded in the tab bar, and Fix #7 shows you how to confirm their status.

Fix #4: Stop Edge from running in the background after you close it

Symptoms:

  • Edge still shows CPU activity in Windows Task Manager after you close every window
  • Your laptop battery drains even though you aren’t browsing

Why it happens: A setting lets Edge extensions and apps keep running after all Edge windows close. That’s why Edge can still appear in Task Manager when it looks closed.

Steps:

  • Type edge://settings/system in the address bar and press Enter.
  • Turn off Continue running background extensions and apps when Microsoft Edge is closed.
Edge Settings System page with the Continue running background extensions and apps when Microsoft Edge is closed toggle highlighted and the Use graphics acceleration when available toggle highlighted

For other ways to keep Edge from lingering, see How to Stop Microsoft Edge Running in the Background When Closed.

Verify: Close all Edge windows, wait a few seconds, and open Windows Task Manager with Ctrl + Shift + Esc.

Many Edge browser processes should disappear, though some can remain because of startup boost, background features, extensions, updates, or policies, so this is a rough check rather than a definitive test of the setting. Any Microsoft Edge WebView2 entries that remain belong to other apps.

Fix #5: Check hardware acceleration with edge://gpu

Symptoms:

  • CPU spikes when you play videos, open maps, or visit graphics-heavy pages
  • Video stutters or drops frames

Why it happens: Edge normally hands graphics work to your GPU. If acceleration is off, or Edge falls back to software rendering because of an outdated graphics driver, the CPU does that work instead.

Steps:

  • Type edge://gpu in the address bar and press Enter.
  • Look at the Graphics Feature Status section at the top.
  • Check whether items like video decode, WebGL, and canvas show as hardware accelerated or as software only.
  • Go to edge://settings/system.
  • Make sure Use graphics acceleration when available is turned on.
  • Click Restart if Edge prompts you, so the change takes effect.
  • If edge://gpu still shows software-only rendering for features you rely on, a driver issue is one possible cause (others include compatibility blocklists, Remote Desktop sessions, policies, or unsupported hardware). Try updating your graphics driver through Settings > Windows Update > Advanced options > Optional updates, or from your GPU maker’s website.

Verify: Reopen edge://gpu. Key features such as video decode should now report hardware acceleration where your hardware supports it (some features may stay software-only by design), and video playback should use less CPU in Browser Task Manager.

Tip: If turning acceleration on causes flickering or crashes, your driver or GPU may be the issue. Turn it back off and see Microsoft Edge Not Responding or Crashing: How to Fix It.

Fix #6: Update Microsoft Edge

Symptoms:

  • High usage started after nothing obvious changed
  • Edge feels slow across many different sites

Why it happens: Edge gets frequent updates that include bug and performance fixes. An older build may have a known issue that’s already patched.

Steps:

  • Type edge://settings/help in the address bar and press Enter.
  • Wait while Edge checks for updates and downloads any it finds.
  • Click Restart when prompted.

At the time of writing, the Edge Stable channel was on version 156.0.4314.42 (released October 22, 2026). Your number will likely be newer. Check Microsoft’s Edge Stable channel release notes to see what each update changed.

Verify: The About page should say Microsoft Edge is up to date.

Fix #7: Check sleeping and discarded tabs with edge://discards

Symptoms:

  • You turned on sleeping tabs, but memory use hasn’t changed
  • Some tabs reload unexpectedly when you switch to them

Why it happens: Edge keeps a diagnostic page showing which tabs are asleep or discarded. Tabs playing audio or added to your exception list are generally intended to stay active, and this page helps you spot tabs that aren’t behaving as expected.

Steps:

  • Type edge://discards in the address bar and press Enter.
  • Review the list of open tabs and their current state.
  • Look for tabs that you expected to be asleep but are still active.
  • Remove those sites from the sleeping tabs exception list (Fix #3) if you don’t need them active.
Edge discards diagnostic page listing open tabs with their discard and loading status columns highlighted

The exact column labels on this page change between Edge versions, so read the headers on your screen rather than looking for specific names.

Verify: After your sleeping-tab timeout passes, inactive tabs should generally show as sleeping here. A discarded state is different: Edge may discard tabs separately, for example under memory pressure, and discarded tabs reload when you return to them.

Fix #8: Reset Edge settings to their defaults

Symptoms:

  • High CPU or memory continues after Fixes #1 through #7
  • No single tab or extension stands out in Browser Task Manager

Why it happens: A corrupted or misconfigured setting that isn’t tied to one tab or extension can keep Edge working harder than it should. A reset clears that out.

What a reset changes: Per Microsoft’s description, it typically restores your startup page, search engine, and pinned tabs to defaults and turns off your extensions, while keeping bookmarks (favorites), history, and saved passwords. Exact behavior can vary with your Edge version, sync, and any work-managed settings, so read the confirmation dialog on your screen, which lists what gets reset.

Steps:

  • Type edge://settings/reset in the address bar and press Enter.
  • Click Restore settings to their default values.
  • Read the confirmation dialog.
Edge Reset settings confirmation dialog with the text describing what is reset and what is kept highlighted, and the Reset button visible
  • Click Reset.
  • Re-enable only the extensions you actually use, one at a time, as in Fix #2.

Verify: Browse normally for a while with Browser Task Manager open. Usage should stay steady.

What You’re Seeing: Quick Reference

There’s rarely a literal error message for this problem. Here’s what the labels in each task manager mean.

What you seeWhat it meansWhere to go
“Microsoft Edge” with a number beside it in Windows Task ManagerNormal multi-process designFix #1 to find the heavy one
“Microsoft Edge WebView2” entriesOther apps using the shared WebView2 componentHDG’s WebView2 article
Tab: entry high in Browser Task ManagerOne site is heavyFix #1, then Fix #3
Extension: entry high in Browser Task ManagerAn extension is misbehavingFix #2
GPU Process high during videoGraphics workloadFix #5
Edge in Task Manager after closing all windowsBackground mode is onFix #4
Software-only rendering on edge://gpuHardware acceleration off or driver problemFix #5

Settings to Check

These settings cause most Edge performance complaints:

  • Save resources with sleeping tabs: Go to edge://settings/system/managePerformance. Check that it’s on and that the exception list isn’t full of sites that don’t need to stay awake.
  • Efficiency mode: Go to edge://settings/system/managePerformance. Turn it on (or Energy saver in newer versions) if your Edge version offers it, especially on a laptop, to reduce power and resource use.
  • Continue running background extensions and apps when Microsoft Edge is closed: Go to edge://settings/system. Turn it off unless you rely on an extension that must run constantly.
  • Use graphics acceleration when available: Go to edge://settings/system. Keep it on unless it causes display glitches.
  • Extension count: Go to edge://extensions/. Extensions you no longer use can still run background scripts, so it’s worth removing ones you haven’t used in months.

Getting Help

If Edge still misbehaves, collect a few details before asking for help:

  • Your Edge version from edge://settings/help.
  • Your Windows 11 version from Settings > System > About.
  • A note of which entries top Browser Task Manager (Shift + Esc).

Then check these official sources:

You can also report the problem directly from Edge through Settings and more (…) > Help and feedback > Send feedback.

Prevention Tips

  • Keep sleeping tabs on: Leave it enabled permanently so long browsing sessions don’t pile up memory.
  • Audit extensions every few months: Remove anything you don’t use. Fewer extensions means fewer background scripts.
  • Use Browser Task Manager first: When Edge slows down, press Shift + Esc before restarting the browser. You’ll learn which sites or extensions are repeat offenders.
  • Keep graphics drivers current: Outdated drivers are a common reason Edge falls back to CPU rendering.
  • Check your RAM: If you regularly run out of memory with a normal number of tabs, the PC may simply need a RAM upgrade. Moving from 8GB to a 16GB RAM kit makes a big difference for heavy browsing on many laptops and desktops.
Help & Answers

Frequently Asked Questions

7 questions

Is it normal to see many Microsoft Edge processes in Task Manager?

Yes. Edge uses a separate process for the browser itself, graphics, each tab, and each extension.

Many entries are expected. Only worry if one of them uses a lot of CPU or memory for a long time.

What’s the difference between Microsoft Edge and Microsoft Edge WebView2 Runtime in Task Manager?

Microsoft Edge entries are your browser. WebView2 Runtime entries come from other Windows apps that use WebView2 to show web content, so they can appear even when Edge is closed. Our WebView2 article explains which apps use it.

How do I find which tab or extension is using the most memory or CPU?

Press Shift + Esc in Edge to open Browser Task Manager, then click the CPU or Memory footprint column to sort. The top entries are your heaviest tabs and extensions.

What does turning on sleeping tabs actually do?

It puts tabs you haven’t used for a set time to sleep, which reduces the resources they use. The tab stays open, and Edge wakes it when you click it. Sites on your exception list are intended to stay active rather than sleep.

Why does Edge keep running after I close it?

The Continue running background extensions and apps when Microsoft Edge is closed setting lets extensions and apps keep working after the windows close. Turn it off in edge://settings/system.

Does resetting Edge delete my bookmarks or passwords?

Normally, no. According to Microsoft, a reset keeps your bookmarks, history, and saved passwords, and resets your startup page, search engine, and pinned tabs and turns off extensions. Check the confirmation dialog before you click Reset, since details can vary by version and managed settings.

Will updating Edge or Windows fix high CPU/memory on its own?

Sometimes. If a bug in an older Edge build causes the problem, an update can fix it.

Updates won’t help if the cause is a heavy site, a bad extension, or too many open tabs. Edge updates through edge://settings/help separately from Windows Update, so check both.

Wrapping Up

In our experience, Fix #1 and Fix #2 are the best places to start. Browser Task Manager often points to a runaway tab or extension, and removing a bad extension can resolve the problem for good, though graphics drivers, background features, or low system memory can also be involved. Turn on sleeping tabs and Efficiency mode either way. If Edge stays heavy after a full reset, look beyond the browser.

A PC that slows down in Edge and every other app may have a malware infection worth scanning for with Windows Security. It may also be short on memory.

If you notice system-wide freezes, disk errors, or SMART warnings, back up your data right away and check the drive’s health before doing anything else. An SSD upgrade can improve everyday performance once you’ve ruled out a failing drive, but it won’t fix one that’s already dying.

StepActionApplies To
Fix #1Find the culprit with Shift + EscAny slowdown
Fix #2Disable extensions one at a timeExtension-driven usage
Fix #3Turn on sleeping tabs and Efficiency modeMany open tabs
Fix #4Turn off background runningEdge active after closing
Fix #5Check edge://gpu and hardware accelerationVideo or graphics CPU spikes
Fix #6Update via edge://settings/helpGeneral or post-update issues
Fix #7Review edge://discardsSleeping tabs not working
Fix #8Reset via edge://settings/resetNothing else worked

Applies to Microsoft Edge Stable on Windows 11. The edge:// pages and Edge settings are largely the same on Windows 10, but Windows menu paths differ, and Windows 10 reached end of support on October 14, 2025.

Sources