How to Find Your Computer Model Number in Windows 11 and 10

Sodiq Olanrewaju
·
5 min read

Help Desk Geek is reader-supported. We may earn a commission when you buy through links on our site. Learn more.

You need your computer model number for a driver or replacement charger, but Windows 11 or 10 may show only a name like DESKTOP-ABC123. Start in Settings > System > About. If no model appears there, System Information in Fix #2 is the quickest reliable check; if Windows only reports a generic name, go to the product label in Fix #3.

Fix #1: Check the model in Settings

  1. Open Settings and select System > About.
Windows 11 Settings > System > About with Device specifications visible
  1. Look under Device specifications for Model or System model, if either appears. Not every PC shows a model here; what this page lists varies by Windows version and manufacturer.
Windows 11 About page with the model field highlighted and Device name visible for comparison

The Device name identifies your Windows installation; it isn’t necessarily the manufacturer’s model. If Settings shows no model, or gives you a generic name, use System Information next.

Computer make and model illustration

Fix #2: Read System Model in System Information

System Information shows the manufacturer and model together, which helps when a product name is hard to recognize.

  1. Press Windows + R to open Run.
  2. Type msinfo32 and press Enter.
Run dialog with msinfo32 entered

You can also search Start for System Information.

Windows 11 Start search result for System Information
  1. Select System Summary.
  2. Read System Manufacturer and System Model. Check System SKU if you need a more specific identifier.
System Information showing manufacturer and model

You should see a model name or code beside System Model. A custom-built PC may show a motherboard model instead; a virtual machine may show its virtual hardware.

Fix #3: Check the product label or box

The printed label is useful when Windows reports a generic model or won’t start.

  1. Check the underside of a laptop. On an older laptop with a removable battery, check the battery compartment too.
Close-up of a Windows laptop product label with the model highlighted and the serial number obscured
  1. For a desktop or all-in-one PC, check the rear, side, top, or stand for a product label.
  2. Check the original box, invoice, receipt, or manual if the label is missing.

Look for Model, Product number, Machine type, or SKU. These can identify a configuration more precisely than a series name. A model name alone can cover several configurations, so match the product number or machine type before ordering a charger, battery, or dock. A serial number or service tag identifies your individual computer, so don’t post it publicly or leave it visible in screenshots.

Fix #4: Get the model with PowerShell

PowerShell is handy when you need a model you can copy into a driver search. You don’t normally need administrator access.

  1. Search Start for Windows PowerShell and open it.
Windows 11 Start search showing Windows PowerShell with Open selected
  1. Run Get-CimInstance -ClassName Win32_ComputerSystem | Select-Object Manufacturer, Model.
PowerShell showing the Get-CimInstance command and its Manufacturer and Model output

The result should have Manufacturer and Model columns. If Model says something generic, such as System Product Name, check the physical label or the manufacturer’s support site.

Fix #5: Check the manufacturer’s support site or app

A manufacturer’s product page can match a model to compatible drivers, a USB-C dock, or a laptop battery. Use the manufacturer’s own site or app.

  1. Open the support site for your PC’s manufacturer. For example, visit Lenovo’s Support website or HP’s Web Product Detection tool.
Lenovo support page showing product search and available device detection options
  1. Enter the model or product number from your label. If the site offers device detection, follow its prompts; it may require a separate utility or permission.
Manufacturer support result with the detected model highlighted and serial number obscured
  1. Compare the result with the label or System Model in Windows. You should reach a support page for your PC’s product family.

If your PC already has Lenovo Vantage, Dell SupportAssist, or HP Support Assistant, open the app and look on its home or device-details screen. Names and layouts vary by app version, and the app may be absent after a clean Windows installation.

Lenovo Vantage device details showing the computer model with serial number obscured

Fix #6: Check with the DirectX Diagnostic Tool

If System Information won’t open, dxdiag offers another view of the manufacturer and model Windows reports for your PC.

  1. Press Windows + R.
  2. Type dxdiag and press Enter.
Run dialog with dxdiag entered
  1. On the System tab, read System Manufacturer and System Model.
DirectX Diagnostic Tool System tab
  1. Select Exit when you’re done.

You should see the same model reported by System Information. If both tools show a generic value, trying more Windows commands probably won’t reveal a better one; check the label or manufacturer’s support page.

Fix #7: Use Command Prompt

Command Prompt’s systeminfo command can show both fields, usually without administrator access.

  1. Press Windows + R, type cmd, and press Enter.
Opening Command Prompt in Windows
  1. Run systeminfo | findstr /C:"System Manufacturer" /C:"System Model".
Command Prompt showing the systeminfo command with System Manufacturer and System Model output

The two matching lines should appear after a short wait. If Windows uses a language other than English, the field names may be translated and this filter may return nothing. Run systeminfo without the filter, or use PowerShell instead.

You may see older instructions using wmic csproduct get name. Microsoft says WMIC has been removed from Windows 11, version 24H2 and later, and it’s no longer available there as an optional feature. Use PowerShell’s Get-CimInstance command for a current Windows 11 PC.

Fix #8: Read the model in UEFI firmware

I’d leave this step until the Windows methods and product label have failed. Save your work first: opening firmware settings requires a restart.

  1. In Windows 11, open Settings > System > Recovery.
Windows 11 Settings > System > Recovery with Advanced startup and Restart now visible
  1. Under Advanced startup, select Restart now.
  2. Select Troubleshoot.
Windows recovery Troubleshoot option
  1. Select Advanced options.
Windows recovery Advanced options
  1. Select UEFI Firmware Settings.
UEFI Firmware Settings option
  1. Select Restart.
Restart button for UEFI firmware settings
  1. Look for Product Name, System Model, Machine Type, or SKU under a tab such as Information or Main.
PC UEFI firmware information screen with product model highlighted and serial number obscured

Firmware menus differ by manufacturer. The UEFI Firmware Settings option can also be missing on some PCs. Read the model and exit without changing boot or security settings.

When the model still looks wrong

Windows tools often read the same information supplied by the PC’s firmware. If several tools show System Product Name, a motherboard model, or a virtual machine name, use the product label and manufacturer support page to identify the physical computer. For a used or refurbished PC, compare those results with the receipt; parts or packaging may belong to a different configuration.

Conclusion

System Information is my pick when Settings leaves you stuck: it puts the manufacturer and model on one screen. Finding a matching product page is the useful breakthrough, especially before ordering a charger or installing drivers. If the label and firmware disagree, confirm the product number with the manufacturer before buying parts.